Contact
Contact us

ISO 70 GARAGE SECTIONAL

The Novoferm ISO 70 garage door is the high-end solution for those seeking maximum insulation, high comfort and advanced security. It is made of 70 mm thick galvanised steel double-sheet panels filled with rigid polyurethane foam for thermal separation. This construction provides excellent insulation performance, reducing heat loss and improving comfort inside the garage.

The construction quality of the ISO 70 is also reflected in its stability and quiet operation. The guides, hinges and balancing systems are designed for intensive and long-lasting use; the torsion springs, which come as standard, ensure smooth and safe movement even on large doors.

From a security point of view, it can also be configured in a burglar-proof version, offering real protection against break-in attempts. The extensive customisation options allow the door to be integrated harmoniously into the building architecture. In combination with Novoferm automation systems, the ISO 70 also guarantees practical, reliable daily use, in line with the highest standards of the residential market.

Your strengths at a glance

  • For private garages up to 5,500 mm wide
  • High thermal and sound insulation with a thermal insulation value U(p) = 0.34 W/m²K

  • Modern, energy-saving LED lighting for Novoferm garage door openers and additional devices
  • Garage door opener with low energy consumption of only 0.5 watts in standby mode
  • Wide choice of surfaces and colours, with final coating
  • Security tested according to burglary resistance class RC 2
  • Maximum security thanks to finger trap protection on the inside and outside

  • Smooth door operation thanks to stainless steel tandem rollers with ball bearings

SECURITY

The sectional garage doors ISO 20 and ISO 45 with a width of up to 3,000 mm and a height of 2,500 mm (smooth) are available with a vertical tension spring system.

With ISO 70, this is only possible up to 3,000 mm (width) and 2,375 mm (height). With a rebate width of only 80 mm per side, these doors are also ideal for renovation projects.

Our products are equipped with devices that guarantee safe operation.

1. RETAINING PULLEY
The tension springs are housed and protected inside the rail, so as to avoid possible interference from the sides of the sectional door. The steel cables also run in a deflection pulley shielded by a U-shaped casing, which contributes to greater protection and reliability of the system.

2. STEEL CABLE HOOK
The new steel cable hook comes with a cable holder and increases safety by ensuring a more stable and controlled sliding of the sections within the frame.

3. INTEGRATED TOOTHED BELT ATTACHMENT
The new horizontal rail design incorporates a dedicated attachment for the NovoPort Speed motor belt. In addition, the sealing device facilitates maintenance operations, making them quicker and easier.

4. VERTICAL SPRINGS PACKAGE
Sectional doors with springs can be equipped with a spring package in a vertical configuration, housed inside the rail. This solution increases stability and safety and reduces the space required on the lintel.

5. NOVOPORT SPEED, UNIQUE AND FLEXIBLE
The NovoPort Speed motor is chosen for its user-friendliness and its special type of installation. Unlike conventional drive motors, it is not fixed to the ceiling, but installed laterally, left or right, on the garage wall. Integrated into the side door track, it leaves the ceiling completely free of clutter.

6. INTERNAL AND EXTERNAL ANTI-SHOCK HAZARDS
The special construction of the sections and hinges is designed to prevent injuries, avoiding the risk of fingers being crushed during door movement.

7. ANGULAR FRAME AND GUIDE FOR INTERNAL CABLES
The angular frame prevents contact between the door leaf and the frame. In addition, the suspension cables are housed inside, minimising the risk of injury.

KEY ASPECTS

  • Simple installation with low overall height
  • Simple spring adjustment
  • Shorter horizontal guides (less space required)
  • Low lintel requirement as standard

PERFORMANCE AND EQUIPMENT

THERMAL INSULATION

 

ISO 70 THERMAL INSULATION

This diagram highlights the construction solutions that improve the tightness, insulation and finish of the door. An additional gasket (1) in the profile head increases the sealing, while the new optimised steel profiles (2) are exclusively made of a double-wall sandwich structure with thermal separation and a thickness of 45 mm (3). The thermal separation between the outer and inner envelope helps to minimise heat loss (4), which is further limited by the additional insulating seal between the sections, designed to further increase performance. This is complemented by a high-quality exterior cladding (5), available in thousands of combinations of colours, surfaces and patterns, for extensive customisation consistent with the building's style.

SECURITY

RC 2 BURGLAR ALARM SYSTEM

The security of a garage does not only depend on the robustness of the door, but also on how well it can resist break-in attempts. Novoferm ISO 45 and ISO 70 garage doors are designed to offer a solid and reliable construction, and for those who want a higher level of protection, they can also be configured with dedicated burglary resistance solutions.

Mechanical security systems applied to garage doors prove to be particularly effective because they make burglary more difficult and slower: the attempt is often interrupted when the intruder cannot quickly gain a way through. In this sense, sectional overhead doors are suitable choices for those who want to increase the protection of their garage and, consequently, also the accesses to their home.

Upon request, ISO 45 and ISO 70 are also available in versions with certifiable burglary protection, which can be achieved in combination with a specific configuration and a compliant installation. In this way, it is possible to combine comfort of use, insulation and higher protection against intrusion attempts, while maintaining an aesthetically pleasing result consistent with the residential context.

Click here to learn about the installation conditions of the RC 2 security system.

SIDE DOOR

SIDE DOOR COMBINED WITH THE SECTIONAL OVERHEAD DOOR

Side doors for sectional overhead doors are installed next to the door, on the façade, and are designed to harmonise perfectly with the aesthetics of the sectional garage door. They are particularly useful when quick access to the garage is needed without opening the door or moving the car, for example to store a bicycle, take tools or enter for short passages.

In terms of construction, they are robust and rigid doors, developed to maintain the same quality standards as the garage system. They can be made of high-quality aluminium profiles with a panel or as a steel door, and are equipped with 3-point locking and hinge protection to increase security and reliability. In addition, to ensure aesthetic continuity, the side door incorporates the same style chosen for the sectional door, with the same colours, finishes and, where applicable, the same windows. In short, it is a solution that combines maximum convenience with an aesthetic result that has been taken care of down to the smallest detail.

 

All door leaf frames are made of aluminium and guarantee maximum weather resistance.
Hinges ensure precise opening and closing over the long term.

There are different types of frame depending on requirements:

  • Block frame (internal or external opening)
  • 3- or 4-sided corner frame
INTEGRATED DOOR

INTEGRATED SWING DOOR

If your garage does not allow the installation of a side door but you still want convenient access, an integrated pedestrian door is the ideal solution. Available for all sectional overhead doors up to 5 metres wide, it offers a practical passage width of 85 cm (reduced to 60 cm with a coffered finish) and provides excellent thermal insulation thanks to its insulated double wall.

 

THRESHOLD

The door leaf frame, combined with the six-chamber reinforced aluminium threshold, ensures high stability and minimises bending even when the door is open. The anodised aluminium threshold, only 24 mm high, facilitates passage and is also suitable for bicycles.

AUTOMATIC CLOSING

Automatic closing is ensured by the overhead door closer (for opening outwards) or the invisible overhead door closer (for opening inwards). A practical solution when you have your hands full, for example when pushing a bicycle.

SOFTLINE PROFILE

The aesthetics of the door are enhanced by rounded Softline profiles and concealed hinges. The door leaf frame is painted traffic white as standard, but for a small surcharge it can also be produced in other RAL colours to match the door leaf.

MULTIPLE LOCKING

If the garage communicates with the house, a multi-point locking system is recommended: several locking points on the door leaf, which can be operated centrally from inside and outside using a profile cylinder. This is standard on inward-opening swing doors.

FINISHES FOR HINGED DOORS

Wide slats

Entire section

SPRINGS

SPRING TECHNOLOGY


Our sectional overhead doors are available with vertical tension springs or robust torsion spring shafts. Compared to models with 20-mm insulation, the 45-mm and 70-mm insulation versions can be equipped with torsion spring shafts with maintenance-free spring break protection, tested according to DIN EN 12604, for a small extra charge. For larger dimensions, torsion springs are provided as standard, so that even in the event of a breakage, the door remains safely retained and can be lifted again.

CUSTOMISATION AND EQUIPMENT

FINISHES

Wide slats

Entire section

SURFACES

STANDARD SURFACES

Noblesse, smooth surface

WOOD-EFFECT SURFACES

Golden oak, smooth

Dark oak, smooth

SATIN-FINISHED SURFACES

Satin white,
similar to RAL 9016

Satin window grey,
similar to RAL 7040

Satin grey,
mixed colour

Satin dark grey,
similar to RAL 7016

Satin brown,
similar to RAL 8014

Satin black,
mixed colour

COLOURS

STANDARD COLOURING

Traffic white,
similar to RAL 9016

SUPERCOLOURS

Moss green,
similar to RAL 6005

Aluminium grey,
similar to RAL 9007

Walnut brown,
similar to RAL 8011

Fir green,
similar to RAL 6009

Quartz grey,
similar to RAL 7039

Sepia brown,
similar to RAL 8014

Light grey,
similar to RAL 7035

Basalt grey,
similar to RAL 7012

Choice of RAL

Window grey,
similar to RAL 7040

Dark grey,
DB703

White aluminium,
similar to RAL 9006

Slate grey,
similar to RAL 7015

Stone grey,
similar to RAL 7030

Anthracite grey,
similar to RAL 7016

WINDOWS

WINDOWS

Standard variant

Variant with cross design

Variant with diamond design

Specifications:

  • Window dimensions: inside 392 x 192 mm, outside 460 x 260 mm.
  • Thickness: 16 mm, double acrylic glass pane.
  • Available with clear or frosted glazing.

OBLÒ

Circular porthole with stainless steel frame

  • Inside ø 290 mm
  • Outside ø 350 mm

Square porthole with stainless steel frame

Dimensions:

  • Inside 235 x 235 mm
  • Outside 320 x 320 mm
HANDLES

CUSTOMISABLE HANDLES

Our handles offer a high degree of customisation, from the choice of material to finishes and colours. Alternatively, for those who prefer an essential but still effective solution, a stainless steel version is also available, ideal for a clean and durable result.

Standard classic handle,
black plastic.

Classic coloured handle,
coated with synthetic material in your choice of RAL

Silver-coloured aluminium handle,
available in other colours

Stainless steel handle

Assembly

 

INSTALLING A SECTIONAL GARAGE DOOR

The following video illustrates, step by step, the installation of Novoferm sectional overhead doors. The video contents are an aid to the installation, operation and maintenance instructions and do not replace them. Installation must be carried out by trained and qualified personnel.

Animations and detailed videos on the benefits, installation and programming of Novoferm sectional garage doors are available on the Novoferm YouTube channel.
https://www.youtube.com/NovofermVideos